H-1900T Horizontal Boring Milling Machining Center
1.T shape base, worktable only moves in Z axis. So it can load heavier part.
2.Low gravity center of entire machine, so machine has better rigidity.
3.Casting body adopts box shape structure with internal built-in reinforced ribs, so machine has better vibration resistance and heat resistance.
4.X axis guide rails are in ladder shape, so column can withstand large front impact from machining. It is very good at inner hole boring and milling.
6.This machine is exactly suitable for box shape workpiece machining, like engine and gearbox shell.7.Twin chip augers locate each side of casting base, which can efficiently discharge cutting chips.
8.Optional gearbox spindle with larger output torque for heavy duty machining.
2000 X 900 mm
5 X 18 X 165 mm
NC index table (Opt.)
Min. Index degree
Allowed loading capacity
X/Y/Z axis traverse
Spindle center to table
Spindle end face to table center
Max. cutting feedrate
Rapid traverse of 3 axes
Positioning accuracy (JIS)
Repeated positioning accuracy (JIS)
Max. tool dia.
Max. tool length
Max. tool weight
Tool change time (T-T)
X/Y/Z axis motors
Coolant pump motor
4500 x 35000 x 3600 mm
1.FANUC CNC controller 0i-TF
2.RS-232 interface & cable
3.USB interface, CF card interface
4.Heat exchanger of electrical cabinet
5.Spindle rigid tapping
6.Arm type tool changer T24
7.Fully enclosed cover
8.Auto centralized lubrication system
11.Working signal light
12.3 phase isolated transformer
14.Toolkit for setup
15.Handle air gun & coolant gun
16.Y axis weight balance system
17.Manual pulse generator
18.Leveling bolts and pads
19.Operation maintenance manual
1..Mitsubishi or Siemens CNC controller
2.Spindle oil chiller
5.Chip conveyor and chip cart
6.Automatic voltage stabilizer
7.NC index table
8.Tool measurement system
9.Workpiece measurement system